• ibe_banner01

Ngwaahịa

UP-6013 ASTM D4541D7234, ISO 462416276 Ihe nleba anya mkpuchi mkpuchi akpaaka, ihe nlebanya na-ewepụ.

Okwu mmalite

Enwere ụzọ atọ bụ isi ugbu a iji nwalee nrapado nke mkpuchi na mkpụrụ: ịgba ígwè, cross-hatch, na ịdọpụ. Ma ịgba ígwè na cross-hatch nwere ike nyochaa naanị grate nke adhesion, mana enweghị ike ịkọwapụta nsonaazụ ya. Usoro ndọpụ nwere ike ịkọwa n'ụzọ zuru ezu kpọmkwem nha nke adhesion, ma o doro anya na iji nyochaa adhesion nke mkpuchi dị iche iche, nke dị mma maka ndị na-emepụta ihe.

Akpaaka Digital Pull-off Adhesion Tester bụ ngwa nnwale nrapado nwere ọgụgụ isi ọhụrụ nke ụlọ ọrụ anyị mepụtara. Ọ na-anwale hydraulically mkpuchi nke otu mpaghara. Ngwá ọrụ na-arụ ọrụ niile nke ịdọpụ ya na-akpaghị aka. Ya mere, a na-adọpụ ngwa ngwa na-eguzosi ike ma na-achịkwa ya, na-ezere njehie sitere na ntinye akwụkwọ ntuziaka; Enwere ike igosipụta ike ndọpụ n'ụzọ ziri ezi site na ngosipụta dijitalụ, ma enwere nkeji abụọ dị iche iche nke MPa na psi ka a ga-ahọrọ; enwere ike ịtọ oke elu nke pressurization; mgbe ị nwetasịrị nrụgide setịpụrụ, enwere ike ịtọ oge obibi iji nyochaa ịdịte aka nke ihe nlele n'okpuru ụfọdụ nrụgide?


Nkọwa ngwaahịa

Mkpado ngwaahịa

Ngwa ahụ na-emezu ihe achọrọ nke GB/T 5210, ASTM D4541/D7234, ISO 4624/16276-1, wdg Ọ bụ ihe nleba anya akpaaka nke mbụ na China ma nwee njirimara nke ọrụ dị mfe, data ziri ezi, ọnụ ahịa mmezi dị ala. na ọnụ ala dị ala nke ịkwado ihe oriri. Nnwale adhesion n'etiti mkpuchi dị iche iche na ụfọdụ mkpuchi isi ihe, mkpuchi mgbochi corrosion ma ọ bụ usoro mkpuchi ọtụtụ.

A na-etinye ihe nlele ule ma ọ bụ usoro n'elu ala dị larịị nwere oke elu otu. Mgbe usoro mkpuchi ahụ akpọnwụwo / gwọọ ya, a na-ejikọta kọlụm ule ahụ ozugbo n'elu mkpuchi ahụ na nrapado pụrụ iche. Mgbe a gwọchara ihe nkedo ahụ, a na-adọta ihe mkpuchi ahụ na ọsọ dị mma site na ngwá ọrụ iji nwalee ike a chọrọ iji mebie njikọ n'etiti mkpuchi / substrate.

Okwesiri iburu n'uche na a na-eji ike ike nke interfacial interface (adhesion failure) ma ọ bụ ike nkwụsị nke mbibi onwe ya (mmekọrịta ọnụ) na-egosi nsonaazụ ule, na nkwụsịtụ / nkwonkwo nwere ike ime n'otu oge.

Isi teknuzu paramita

dayameta spindle 20mm (ọkọlọtọ); 10mm, 14mm, 50mm (nhọrọ)
mkpebi 0.01MPa ma ọ bụ 1psi
izi ezi ± 1% zuru oke
ike ọdụdọ dayameta spindle 10mm → 4.0 ~ 80MPa; Ogwe eriri 14mm → 2.0 ~ 40MPa;

Mpempe akwụkwọ 20mm → 1.0 ~ 20MPa; Ogwe ọkpụkpụ 50mm → 0.2 ~ 3.2mpa

ọnụego pressurization dayameta spindle 10mm → 0.4 ~ 6.0mpa / s; Ogwe eriri 14mm → 0.2 ~ 3.0mpa / s;

Dayameta spindle 20mm → 0.1 ~ 1.5mpa / s; Ogwe eriri 50mm → 0.02 ~ 0.24mpa / s

ịnye ọkụ Batrị lithium nwere ike ịchaji arụnyere n'ime ya nwere ọkụ nwere ike ịchaji
onye ọbịa size 360mm × 75mm × 115mm (ogologo x obosara x elu)
onye ọbịa arọ 4KG (mgbe batrị zuru oke)

  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya