• leqephe_banner01

Lihlahisoa

UP-6195 Kamore ea Teko ea Tlelaemete e meraro

Kopo:

Kamore ea tlhahlobo ea mocheso oa mocheso e sebelisetsoa ho leka mefuta e fapaneng ea lisebelisoa bakeng sa ho mamella mocheso, serame, ho omella, mongobo.E sebelisoa bakeng sa tlhahlobo ea boleng bakeng sa mefuta eohle ea lihlahisoa tsa elektroniki, lisebelisoa tsa motlakase, le lihlahisoa tse tsoang puisanong, sesebelisoa, koloi, polasetiki, tšepe, lijo, lik'hemik'hale, thepa ea kaho, indasteri ea bongaka le ea sefofane.

Likaroloana:

1. Ponahalo e ntle, 'mele o bōpehileng joaloka selikalikoe, bokaholimo bo ts'oaroang ka likhoele tsa moholi le mohele oa sefofane ntle le karabelo.Ho bonolo ho sebetsa, ho bolokehile ebile ho ka tšeptjoa.

2. Fensetere ea ho shebella e nang le likhalase tse peli tse nang le likhalase tse peli bakeng sa ho shebella tlhahiso ea tlhahlobo nakong ea tlhahlobo.Fesetere e na le sesebelisoa sa ho futhumatsa sa motlakase se thibelang mofufutso se ka thibelang mouoane oa metsi hore o se ke oa kenella marotholing, 'me ka khanya e phahameng ea PL fluorescent bulbs ho fana ka leseli ka har'a lebokose.

3. Menyako e thibelang moea ka makhetlo a mabeli, e khonang ho kenya mocheso oa ka hare ka katleho.

4. Sistimi ea phepelo ea metsi e hokeloa ka ntle, e loketseng ho tlatsoa metsi hape ka pitseng ea mongobo 'me e ka sebelisoa hape ka bo eona.

5. Letšoao la French Tecumseh le sebelisoa bakeng sa tsamaiso ea potoloho ea compressor, e khonang ho tlosa lubricant pakeng tsa liphaephe tsa condensation le capillaries.Setsidifatsi se sireletsang tikoloho se sebediswa bakeng sa letoto lohle (R232,R404)

6. Skrine ea ponts'o ea LCD e tsoang kantle, e khonang ho bonts'a boleng bo lekantsoeng hammoho le boleng bo behiloeng le nako.

7. Sehlopha sa taolo se na le mesebetsi ea ho hlophisa likarolo tsa likarolo tse ngata, le ho laola ka potlako kapa moepa oa mocheso le mongobo.

8. Pulley e kentsoeng ea selefouno, e loketseng ho sisinyeha ho falla, e nang le li-screws tse matla tsa boemo.

 


  • :
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    Tlhaloso

    Mohlala No UP6195B-72 UP6195B-162
    Boholo ba kamore e ka hare(mm)W*H*D 400×400×450 600×450×600
    Boholo ba kamore ea ka ntle(mm)W*H*D 1060×1760×780 1260×1910×830
    Tshebetso   

     

     

     

     

     

     

     

    Boemo ba mocheso -160 ℃, -150 ℃, -120 ℃, -100 ℃, -80 ℃, -70 ℃, -60 ℃, -40 ℃, -20 ℃,0 ℃~+150 ℃,200 ℃,250 ℃,300 ℃,400℃,500℃
    Sebaka sa mongobo 20%RH ~98%RH(10%RH ~98%RH kapa 5%RH ~98%RH)
    Temp.&Humi feto-fetoha ±0.2°C, ±0.5%RH
    Temp.Humi.Uniformity ±1.5°C;± 2.5%RH(RH≤75%), ± 4%RH(RH> 75%) Ts'ebetso e se nang moroalo, Ka mor'a boemo bo tsitsitseng ba 30 min.
    Temp.humi resolution 0.01°C;0.1%RH
    20°C ~ Mocheso o PhahamengHo futhumatsa nako °C 100 150
      Min 30 40 30 40 30 45 30 45 30 45 30 45
    20°C ~ Mocheso o tlaseNako ea ho phomola °C 0 -20 -40 -60 -70
      Min 25 40 50 70 80
    Sekhahla sa mocheso ≥3°C/mots
    Sekhahla sa ho pholisa ≥1°C/mots
    Lintho tse bonahalang   Lisebelisoa tsa kamore e ka hare SUS#304 poleiti ea tšepe e sa hloekang
    Lintho tse ka ntle tsa kamore poleiti ea tšepe e sa hloekang + e koahetsoeng ka phofo
    Insulation Material Boea ba PU & Fiberglass
    Tsamaiso   

     

     

     

     

     

     

     

    Sistimi ea potoloho ea moea Fane e phodileng
    Fane Motlatsi oa Sirocco
    Sistimi ea ho futhumatsa SUS#304 heater ea tšepe e sa hloekang ea lebelo le phahameng
    Ho foka ha moea Phetoho ea Moea e qobelloang(E kena ka tlase ebe e tloha holimo)
    Sistimi ea humidification Sistimi ea mouoane holim'a metsi
    Sistimi ea sehatsetsing Compressor e tsoang kantle ho naha, kompressor ea French Tecumseh kapa Sejeremane Bitzer Compressor, evaporator ea mofuta o feliloeng, moea(Metsi) -condenser e pholileng
    Mokelikeli oa sehatsetsing R23/ R404A USA Honeywell.
    Ho kokobetsa Moea (Metsi) -condenser e pholisang
    Sistimi ea ho tlosa mongobo Mokhoa oa ho phoka oa bohlokoa oa ADP oa ntlha ea phoka / dehumidifying
    Tsamaiso ea ho laola Lipontšo tsa elektroniki tsa dijithale+SSRWith PID ea boiketsetso bokhoni ba ho bala
    Sehokelo sa ts'ebetso Setsebi se Seholo sa Mocheso le Mongobo,Shift ea Sechaena-Senyesemane.
    Molaoli   

     

     

     

     

    Bokhoni bo ka reroang Boloka lifaele tse 120 ka mehato e fihlang ho 1200 e ngoe le e ngoe
    Setting range Mocheso: -100 ℃+300 ℃
    Ho nepahala ha ho bala Mocheso: 0.01℃
    Kenyeletso PT100 kapa T Sensor
    Taolo Taolo ea PID
    Khokahano ea puisano E na le lisebelisoa tse tloaelehileng tsa li-interface tsa USB, RS-232 le RS-485, li nolofalletsa kamore ea teko hore e hokahane le komporo ea motho (PC), ho fihlela taolo le taolo ea mechini e mengata ka nako e le 'ngoe.Standard: USB external memory port. Ho ikhethela: RS-232, RS-485, GP-IB, Ethernet
    Mosebetsi oa ho hatisa Sehatisi sa Mocheso sa Mocheso oa Japan Yokogawa(Lisebelisoa tsa boikhethelo)
    Motlatsi Fokotsa Alamo, Boitlhatlhobo, Pontšo ea Alamo(Sesosa se Hlolehileng), Sesebelisoa sa nako(Switch Automatic)
    Lisebelisoa Fesetere ea ho shebella likhalase tse nang le likarolo tse ngata, Boema-kepe ba Cable(50mm), Lebone la ho laola boemo, Lebone la kamore, Shelofo ea ho kenya mohlala (2pcs, boemo bo ka fetoloa), Guaze 5pcs, Buka ea ts'ebetso 1 set.
    Sesebelisoa sa ts'ireletso ea ts'ireletso Sesireletsi se sirelletsang mocheso ho feta tekano,Tshireletso ea khatello e feteletseng ea Compressor,Tsireletso ea ho laola boima ba sistimi,Tshireletso ea sistimi e futhumatsang, lebone la sesupo sa overload.
    Phepelo ea motlakase AC 1Ψ 110V;AC 1Ψ 220V;3Ψ380V 60/50Hz
    Tšebeletso e ikhethileng Rea u amohela ho Non-standard, litlhoko tse khethehileng, litaelo tsa OEM/ODM.
    Lintlha tsa tekheniki li tla fetoha ntle le tsebiso

     

    Sebopeho:

    1.Modular insulation panel, CAM hook, Ho kenya ho bonolo, ho bonolo ho kenya
    2.Sehatsetsi: R22, R404A, Glycol Secondary Refrigerant
    3.Mocheso Range: Ho tloha 0℃;-20℃;-40℃;-60℃~+70℃(+80℃)
    4.Room Size: Ho latela moralo oa kopo ea bareki
    5.Mesebetsi: Boloka e Ncha, e Hatsele, e Hatsetsa ka potlako, e Pakile mollo,
    6. Li-fittings tsa sehatsetsi tse tsebahalang lefatšeng ka bophara
    7.Long bophelo potoloho
    8.PID molaoli, ho bonolo ho sebetsa le tsamaiso
    Mofuta oa 9.Defrost: Motlakase o senya, o senya metsi
    10.Ho sebetsa hantle haholo le moralo oa ho boloka matla


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona