UP-2008 Rebar Metal Tensile Strength Tester

Introduction:

Hydraulic Steel Rebar Metal Tensile Strength Tester is mainly used for metal and nonmetal materials tensile, compression, bending and other mechanical properties testing, accompanied by increased shear shear test can be done.The machine is equipped with computers, printers, electronic extensometer, universal testing optical encoders and software, can accurately determine the metal material tensile strength, yield strength, provides that non-proportional extension strength, elongation, modulus and other mechanical properties.You can check and print test results (force – displacement, force – deformation, stress – displacement, stress – deformation, force – time distortion – time) six curve and related test data with the software self-test function that can self-diagnose problems, See software description.It is industrial and mining enterprises, research institutes, universities, engineering quality supervision station ideal for test equipment and other departments.

Send email to us

Product Detail

Product Tags

Main performance technical specifications

Max load KN	100	300		600		1000
Range	whole journey didn't sub-file, equivalent 3 grade			whole journey didn't sub-file, equivalent 4 grade
Test force measuring range KN	4%-100%FS			2%-100%FS
Test Force showed the relative error	≤indicating value±1%
Test Force Resolution	0.01kN
Displacement measurement resolution mm	0.01
Deformation measurement accuracy mm	±0.5%FS
Maximum tensile test space mm	550	650	750	900
Compression space mm	380	460		700
Diameter of round specimen clamp jaw mm	Φ6-Φ26	Φ13-Φ40		Φ13-Φ60
Thickness of flat specimen clamping jaws mm	0-15	0-15/15-30		0-40
Maximum clamping width of the flat specimen mm	70	75		125
Maximum clamping width of the flat specimen (Column number)	2	2/4		4
Shear specimen diameter mm	10
Upper and lower compression plate size	Φ160(option 204×204) mm
Clamping method	Manual clamping	Automatic clamping
The maximum distance between the fulcrum bending	450			—
Space stretching from the two pillars distance	450	550/450		700	850
Pump motor power KW	1.1			1.5	3
Beam moves up and down motor fixed rate KW	0.75	1		1.5

Host

Adopt oil cylinder under mounted type host, stretching space is at the top of host, compression test space is between the at the work table and the crossbar.

Transmission system

Down beam go up and down by the use of motor reducer, chain drive mechanism, vice screw drive, to achieve tensile, compression of space to adjust.

Hydraulic System

The oil tank is sucked through the filter screen and be inhaled pump oil ,through the petroleum pipeline of oil pump transport to oil valve,When the hand wheel to send off the oil, due to the role of oil will push the piston, the oil from the return pipe to tank, when the hand wheel to open get the oil, then the working fluid into the fuel tank through the tubing, pressure tubing through and through oil return valve to tank.