UP-2011 2000kN 3000kN Electronic Concrete Compression Resistance Testing Machine

Introduction:

The testing machine is mainly used for brick, stone, cement, concrete and other building materials, compressive strength test,also used to test the compressive performance of other materials.

Spatial adjustment method: Electric lift

Hydraulic System:

The hydraulic oil tank driven by high-pressure pump into the motor oil, flows through the unidirectional valve, high pressure filter, pressure valve, servo valve, into the cylinder. Computer control signals to the servo valve, Control direction and opening of the servo valve, to control the flow into the cylinder, achieve constant test force control.

Send email to us

Product Detail

Product Tags

Control system

System including digital servo valve, high-precision sensors, controllers and software, high control precision and reliability. Meet GB, ISO, ASTM and other standards for cement, mortar, concrete and other materials testing requirements.

System has the following functions:

1. Closed-loop control with force;

2. Can achieved constant loading rate or constant stress loading rate;

3. Adopt computer for electronic measurement, automatic test;

4. Computer automatically calculates the results and print reports.(picture 1 picture 2)

5. Test reports can be to self-design and exported to

Safety protection device

When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.

Main performance technical specifications

Max load	2000KN	3000KN
Test force measuring range	4%-100%FS
Test Force showed the relative error	≤indicating value±1%	<±1%
Test Force Resolution	0.03KN	0.03KN
Hydraulic pump rated pressure	40MPa
Upper and lower bearing plate size	250×220mm	300×300mm
Maximum distance between the upper and lower plate	390mm	500mm
Piston diameter	φ250mm	Φ290mm
Piston stroke	50mm	50mm
Motor Power	0.75 kW	1.1kW
Outside dimension (lwh)	1000×500×1200 mm	1000×400×1400 mm
GW Weight	850kg	1100kg