UP-6013 ASTM D4541D7234, ISO 462416276 Automatic Coating Degumming Tester,Pull-off Adhesion Tester

Introduction

There are currently three main methods for testing the adhesion of a coating to a substrate: cycling, cross-hatch, and pull-off. Both cycling and cross-hatch can only evaluate the grate of adhesion, but cannot quantify the results. The pull-off method can quantitatively describe the specific size of the adhesion, and it is clear to evaluate the adhesion of different coatings, which is very suitable for formulation developers.

Automatic Digital Pull-off Adhesion Tester is a new intelligent adhesion testing instrument developed by our company. It hydraulically tests the coating of a specific area. The whole process of pull-off is automatically performed by the instrument. Therefore, the pull-off speed is stable and controllable, avoiding the error caused by manual pressurization; the pull-off force can be accurately displayed by the digital display, and there are two different units of MPa and psi to be selected; the upper limit of pressurization can be set; after reaching the set pressure, the dwell time can be set to evaluate the durability of the sample under a certain pressure?

Send email to us

Product Detail

Product Tags

The instrument meets the requirements of GB/T 5210, ASTM D4541/D7234, ISO 4624/16276-1, etc. It is the first automatic pull-off tester in China and has the characteristics of simple operation, accurate data, low maintenance cost and low cost of supporting consumables. Adhesion testing between different coatings in some concrete base coats, anti-corrosion coatings or multi-coat systems.

The test sample or system is applied to a flat surface having a uniform surface thickness. After the coating system is dried/cured, the test column is directly bonded to the surface of the coating with a special adhesive. After the adhesive is cured, the coating is pulled at a suitable speed by the instrument to test the force required to break the adhesion between the coating/substrate.

It is worth noting that the tensile force of the interfacial interface (adhesion failure) or the tensile force of the self-destruction (cohesive failure) is used to indicate the test results, and the adhesion/cohesive failure may occur simultaneously.

Main technical parameters

spindle diameter	20mm (standard);10mm, 14mm, 50mm (optional)
resolution	0.01MPa or 1psi
accuracy	±1% full range
tensile strength	spindle diameter 10mm→4.0~80MPa;Spindle diameter 14mm→2.0~ 40MPa; Spindle diameter 20mm→1.0~20MPa;Spindle diameter 50mm→0.2~ 3.2mpa
pressurization rate	spindle diameter 10mm→0.4~ 6.0mpa /s;Spindle diameter 14mm→0.2 ~ 3.0mpa /s; Spindle diameter 20mm→0.1~ 1.5mpa /s;Spindle diameter 50mm→0.02~ 0.24mpa /s
power supply	built-in rechargeable lithium battery is equipped with a rechargeable power supply
host size	360mm×75mm×115mm (length x width x height)
host weight	4KG (after full battery)