Products
UP-6202B Vacuum Low Pressure Test Chamber4-1
Product Parameter
| Model No |
UHV-150 |
UHV-225 |
UHV-408 |
UHV-800 |
UHV-1000 |
|||||
| Working room(L) |
150 |
225 |
408 |
800 |
1000 |
|||||
| Inner chamber size(mm)W*H*D |
500*600*500 |
500*750*600 |
600*850*800 |
1000*1000*800 |
1000*1000*1000 |
|||||
| Exterior chamber size(mm)W*H*D |
1000*1600*1400 |
1000*1750*1500 |
1100*1850*1700 |
1500*2000*1700 |
1850*1600*2250 |
|||||
| Packaging volume(CBM) |
3 |
3.5 |
4.5 |
5.5 |
6 |
|||||
| G.W.(KGs) |
320 |
350 |
400 |
600 |
700 |
|||||
| Performance | Temperature range | -160℃,-150℃,-120℃,-100℃,-80℃,-70℃,-60℃,-40℃,-20℃,0℃~+150℃,200℃,
250℃,300℃,400℃,500℃ |
||||||||
| Testing temperature range | -160℃,-150℃,-120℃,-100℃,-80℃,-70℃,-60℃,-40℃,-20℃,0℃~+150℃,200℃,
250℃,300℃,400℃,500℃ |
|||||||||
| Humidity range | 20%RH ~98%RH(10%RH ~98%RH or 5%RH ~98%RH) | |||||||||
| Temp.fluctuation | ±0.5℃(Room pressure) | |||||||||
|
Temp.accuracy |
±2.0℃(Room pressure) | |||||||||
| Heating up time | ≤60min(+20℃~+150℃,RP,No-Load) | |||||||||
| Cooling down time |
≤45min(RP) |
≤60min(RP) |
≤90min(RP) |
|||||||
| Pressure range | Atmospheric pressure~-98KPa,~133KPa,~0KPa | |||||||||
| Pressure control tolerance | ±0.1kPa(≤2kPa),±5%(2kPa~40kPa),±2kPa(≥40kPa) | |||||||||
|
Depressurization time |
≤20min |
≤25min |
≤30min |
≤45min |
≤50min |
|||||
| Working environment | Temp:+5℃~+35℃;Humidity:≤90%RH;Air pressure:86-106kPa | |||||||||
| Material |
Exterior chamber materia |
Stainless steel plate+ powder coated | ||||||||
| Inner chamber materia | SUS#304 stainless steel plate | |||||||||
|
Insulation Material |
PU Fiberglass wool | |||||||||
| System | Air circulation system | Cooling fan | ||||||||
| Heating System | SUS#304 stainless steel high-speed heater | |||||||||
| Humidification system | Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser | |||||||||
| Dehumidification system | ADP critical dew point cooling/dehumidifying method | |||||||||
| Vaccuum system | Equipped with vacuum pump | |||||||||
|
Controlling system |
TEMI880,990 | |||||||||
| Power kw |
8 |
10 |
12 |
15 |
20 |
|||||
|
Water supply |
Water temperature:≤30℃;water pressure:0.2~0.4MPa;flow rate:≥10T/h | |||||||||
| Other components | Specimen holders 2pcs,electrical wire 1pc(3M),pressure testing port. | |||||||||
| Safety protection device | Over-heat protection circuit breaker,Compressor overload protection,Control system overload protection,Humidifying system overload protection,Overload indicator lamp. | |||||||||
| Power supply |
AC 3Ψ380V 60/50Hz |
|||||||||
Feature
1.Temperature range from -70 to 200°C
2.Altitude range from ground to 100,000 feet
3.Optional humidity control when altitude system is off
4.Chamber interior size specified by customer
5.Automatic altitude control, integrated with temperature controller
—No manual setting of altitude level!
6.Vacuum pump sized for climb/dive rate required by application
7.Viewing window and cable ports available
Standard
1.GB10590-89 Low-temperature and low atmospheric pressure testing condition
2.GB10591-89 High-temperature and low atmospheric pressure testing condition
3. GB11159-89 low atmospheric pressure technical condition
4. GB/T2423.25-1992 Low-temperature and low atmospheric pressure test chamber
5. GB/T2423.26-1992 High-temperature and low atmospheric pressure test chamber
6.GJB150.2-86 High-temperature and low atmospheric pressure(Altitude) test
7,IEC60068-2-1.1990 Testing methods of Low-temperature test chambers
8,IEC60068-2-2.1974 Testing methods of High-temperature test chambers
9,IEC-540
10,ASTM D2436
11,JIS K7212
12,DIN 50011
13,BS2648
14,Mil-Std 202G (conditions 105C, A/B/C/F)
15,Mil-Std 810G (condition 500.5)
16,IEC 60068-2-39
17,IEC 60068-2-40
18,RTCA/DO-160F
19,JIS W 0812
