UP-6026 Friction coefficient meter COF Tester ASTM D1894 ISO8295

I-friction coefficient imitha ye-COF Tester ASTM D1894 ISO8295
Sebenzisa

I-UP-6026 Friction coefficient tester isetyenziselwa ukulinganisa i-static kunye ne-dynamic coefficients ye-friction yefilimu yeplastiki kunye nefilimu encinci (okanye ezinye izinto ezifanayo). Ngokulinganisa ukugudiswa kwezinto, ukuvulwa kwengxowa yokupakisha kunye nesantya sokupakisha umatshini wokupakisha unokulawulwa kwaye ulungelelaniswe ukuhlangabezana neemfuno zemveliso.

Umgangatho woVavanyo: GB10006 ASTM D1894 ISO8295

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimpawu:

I-1.Inkqubo epheleleyo yedijithali ezenzekelayo, isikrini sokuchukumisa isibonisi.Ukulandelela inkqubo yokuvavanya kubonisa amandla okubetha, kwaye iziphumo zovavanyo zibonisa i-coefficient ye-friction enamandla kunye ne-static.

2.Qhagamshela kwikhompyuter.Xa uqhagamshelwe kwikhompyuter, ukongeza kwimemori ngokuzenzekelayo kwaye ugcine iziphumo, unokubonisa utshintsho kwijika le-friction kwaye ugcine.

I-3.Ukusebenzisa i-sensor yamandla echanekileyo echanekileyo, ukuchaneka kokulinganisa ibakala le-1.

I-4.Inkqubo yokuqhuba eyenzelwe ngokukhethekileyo, intshukumo egudileyo, iziphumo zovavanyo ezichanekileyo.

Iiparamitha zobuGcisa:

1.Ubukhulu beSampuli: ≤0.2mm
Ubungakanani be-2.Slider (ubude × ububanzi): 63×63mm
3.Ubunzima besilayidi: 200±2g
4.Ubungakanani betafile yovavanyo: 170×336mm
5.Ukuchaneka komlinganiselo: ±2%
6.Isantya sentshukumo yesilayidi :(0-150) mm/min (iyalungiseka)
7.I-Slider stroke: 0-150mm (iyalungiswa)
8.Uluhlu lwamandla: 0-5N
9.Imilinganiselo yangaphandle: 500×335×220 mm
I-10.Ubonelelo lwamandla: AC220V, 50Hz

Ubumbeko:I-Mainframe, isoftware ekhethekileyo, intambo ye-RS232.